CUAV C-RTK 9Ps

The CUAV C-RTK 9Ps is a multi-satellite, multi-band, centimeter-level, RTK GNSS system.

The module simultaneously receives GPS, GLONASS, Galileo and Beidou satellite signals, enabling faster positioning and higher accuracy. It also supports RTK GPS Heading using dual modules.

Using the C-RTK 9Ps gives PX4 centimeter-level positioning precision. This is ideal for survey drones, agricultural drones and other application scenarios.

C-RTK 9Ps

Where to Buy

cuav Store

Specification

Specification

Wiring and Connections

C-RTK 9Ps (Base)

Base module setup

• Use a tripod to mount the base station's antenna to the top, and connect the antenna to the base station

• Connect the base station and telemetry to the computer with a usb cable.

C-RTK 9Ps (Rover)

Rover mode setup

• Mount the C-RTK 9Ps (Rover) antenna vertically.

• Connect the antenna to the C-RTK 9Ps (Rover).

• Connect the C-RTK 9Ps (Rover) to the flight controller.

• Connect telemetry to the flight controller TELEM1/TELEM2 interface

:::note C-RTK 9Ps come with 6-pin and 10-pin connectors compatible with Pixhawk-standard flight controllers. Connect to GPS1 or GPS2. Select the appropriate cable for the flight controller. :::

Configuration

RTK setup and use on PX4 via QGroundControl is largely plug and play (see RTK GPS for more information).

Pinouts

Pinouts

Physical Dimensions

Cuav-9ps dimensions

Base unit antenna: physical dimensions

Sky unit antenna: physical dimensions

Navigation update rates

Navigation update rate information

More information

CUAV docs